Door will not unlock - Front Load Washer - Product - Amana. · Pressing the power button cancels the "Fan Dry" option and unlocks the door. Press the “Drain and Spin” button on the washer's control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock. Unlocking a Front Load Washer Door When it is - Amana.
Plugging the washer into a grounded three-prong outlet as listed in the owner installation instructions will cause the following events to occur: The door will immediately unlock. The lock on the door will blink and unlock after approximately sixty seconds, and nothing else will happen with the machine during this. Pressing the power button cancels the "Fan Dry" option and unlocks the door. Press the “Drain and Spin” button on the washer's control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock. Remove the top cover of the Amana washing machine. Insert a putty knife between the top and front of the washer and press in to release the locking tab. Remove the connectors from the terminal by grasping the connectors and pulling them off. Check the pressure switch located inside the control console. Also Know, how do I unlock my Amana front load washer? Amana Front Load washer door locked at install.
2 Press and hold the control lock key for 3 seconds to unlock. F# E# or F## E##. When this code appears on the display, it is a system error code. If the door or lid won't open at the end of the cycle, then the lock mechanism may be at fault. Most washers will have a manual release to unlock the mechanism. 28 thg 4, Amana front load washer. I shut it off then tried to start This will help us provide more specific troubleshooting for this problem.
0コメント